Bevel Gear Assembly

Bevel Gear Assembly

Step 1

.Create 90 deg angle constraint between gears

Step 2

select plane definition from reference element toolbox then create a plane on pinion's addendum's center.

Step 3

select plane definition from reference element toolbox then create a plane on main gear's diddendum's center.

Step 5

.The bevel's cones should be coincidence by coincidence constraint

Step 5

The planes that have created in steps 2 and 3 should should be coincidence by coincidence constraint

0 دیدگاه

افزودن دیدگاه


مقالات اخیر گروه